By: Danielle Kearns
Let's talk about glass, baby! A few weeks back, we did a blog on bottle slumping -- an option that is available for glass fusing here in the studio. You can read all about that here. But there's a lot more available in terms of glass. Most notably, draping and slumping. Both options will allow the glass creation to take on a shape that will slowly melt in the kiln to create a fold or curve to the edges. But before I go there, let me break down where it all begins.
Glass fusing might be a term that confuses some. It most often get confused for glass blowing or stained glass, but glass fusing is a little bit different. It is an art form that basically means you do the arrangement of glass and the kiln does the fusing for you. We teach you how to (safely) cut and assemble glass in the forms of scrap, pebbles, frit, or rods. These will all go on a base tile, which will ultimately determine the final piece's shape. Your job is to create a visual you like by arranging the glass fragments and keeping them attached to the glass base using either hair spray or school glue, believe it or not.
The glass will then go into the kiln for its first load. This round will actually be the fusing step where the top layers will melt and adhere to the bottom base, ultimately "fusing" your piece as one. For many, this may create the final project. This is perfect for sun catchers, wall hangings, night lights, coasters -- or really anything that can be flat. But if you want to make things a little more interesting, you can opt to have your glass shaped. This requires a second go around in the kiln where a mold will be used to achieve that shape.
A slump is the most basic. It uses a mold in where the glass will be laid and the kiln will do all the work. The temperature is the perfect rate where the glass will take the shape of the mold, creating subtle, smooth curved edges. This allows the piece to be slightly more functional in your house -- this a soap dish, appetizer dish, or even a catch all. The "slump" technique is also how we achieve those bottle slumps everyone loves.
A drape makes for a more exaggerated shape. In this process, the glass is put on a mold that resembles an upside down tumbler. The glass will then melt down in the kiln, creating more dramatic edges. This sort of piece is most often used to create a candle holder. The final form will never be exactly the same every time and the weight of the piece will play a part. Check out the rainbow glass in the photos below to see the crazy curves that came from this drape.
Want to know more about glass fusing? Send your questions to us in the comments section below and we'll be sure to answer them. Glass workshops are live on our website. Register for them here.
You heard it here first! Glass fusing will only be available at our West Hartford location for a couple more months. During the holiday season, glass fusing will move to The Firestone, our new sister studio in Manchester and will no longer be available on a walk-in basis at The Claypen.
Danielle is a CT native, She started at the claypen in 2018 as a Studio Associate and quickly became a Team Lead and our resident blogger on staff. Her previous experience includes teaching, writing, and photography. You can find her on Instagram and LinkedIn or reach out with questions via email.